In the last article, I showed you how to install Nginx and PHP (PHP-FPM) on CentOS 6 from source. Today, I’m going to show you how to install Nginx with PHP-FPM via yum.

Before starting to install Nginx and PHP-FPM, you must uninstall all previous Apache and PHP related RPMs installed on your system. Login as root and type the following command

# yum remove httpd* php*

Enabling Additional Repositories

By default, php-fpm is not available from the official CentOS repositories, but from the Remi RPM repository which itself depends on the EPEL repository; we can enable both repositories as follows:

# yum install yum-priorities -y
# rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
# rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm

Sample outputs

Retrieving http://download.fedora.redhat.com/pub/epel/6/x86_64/epel-release-6-5.noarch.rpm
warning: /var/tmp/rpm-tmp.00kiDx: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
Preparing...                ########################################### [100%]
   1:epel-release           ########################################### [100%]

Installing Nginx

Type the following command

# yum install nginx

Sample outputs

Dependencies Resolved

================================================================================
 Package                  Arch      Version                    Repository  Size
================================================================================
Installing:
 nginx                    x86_64    0.8.54-1.el6               epel       358 k
Installing for dependencies:
 GeoIP                    x86_64    1.4.8-1.el6                epel       620 k
 fontconfig               x86_64    2.8.0-3.el6                base       186 k
 freetype                 x86_64    2.3.11-6.el6_1.8           updates    358 k
 gd                       x86_64    2.0.35-10.el6              base       142 k
 libX11                   x86_64    1.3-2.el6                  base       582 k
 libX11-common            noarch    1.3-2.el6                  base       188 k
 libXau                   x86_64    1.0.5-1.el6                base        22 k
 libXpm                   x86_64    3.5.8-2.el6                base        59 k
 libjpeg                  x86_64    6b-46.el6                  base       134 k
 libpng                   x86_64    2:1.2.46-1.el6_1           base       180 k
 libxcb                   x86_64    1.5-1.el6                  base       100 k
 libxslt                  x86_64    1.1.26-2.el6               base       450 k
 perl                     x86_64    4:5.10.1-119.el6_1.1       base        10 M
 perl-Module-Pluggable    x86_64    1:3.90-119.el6_1.1         base        37 k
 perl-Pod-Escapes         x86_64    1:1.04-119.el6_1.1         base        30 k
 perl-Pod-Simple          x86_64    1:3.13-119.el6_1.1         base       209 k
 perl-libs                x86_64    4:5.10.1-119.el6_1.1       base       575 k
 perl-version             x86_64    3:0.77-119.el6_1.1         base        49 k

Transaction Summary
================================================================================
Install      19 Package(s)
Upgrade       0 Package(s)

Total download size: 14 M
Installed size: 47 M
Is this ok [y/N]: y

If you want to run nginx by default when the system boots, type the following command

# chkconfig --level 345 nginx on

To start Nginx for the first time, type the following command

# /etc/init.d/nginx start

Sample output

Starting nginx:                                            [  OK  ]

Installing PHP-FPM

Type the following command

# yum --enablerepo=remi install php php-fpm

Sample outputs

Dependencies Resolved

====================================================================================
 Package            Arch        Version                          Repository    Size
====================================================================================
Installing:
 php                x86_64      5.3.10-2.el6.remi                remi         2.3 M
 php-fpm            x86_64      5.3.10-2.el6.remi                remi         1.1 M
Installing for dependencies:
 apr                x86_64      1.3.9-3.el6_1.2                  base         123 k
 apr-util           x86_64      1.3.9-3.el6_0.1                  base          87 k
 apr-util-ldap      x86_64      1.3.9-3.el6_0.1                  base          15 k
 httpd              x86_64      2.2.15-15.el6.centos.1           updates      813 k
 httpd-tools        x86_64      2.2.15-15.el6.centos.1           updates       70 k
 libedit            x86_64      2.11-4.20080712cvs.1.el6         base          74 k
 mailcap            noarch      2.1.31-2.el6                     base          27 k
 php-cli            x86_64      5.3.10-2.el6.remi                remi         2.2 M

Transaction Summary
====================================================================================
Install      10 Package(s)
Upgrade       0 Package(s)

Total download size: 6.8 M
Installed size: 21 M
Is this ok [y/N]: y

If you want to run php-fpm by default when the system boots, type the following command

# chkconfig --level 345 php-fpm on

PHP was installed with only core modules. It’s very likely that additional modules will be desired, such as MySQL, XML, GD, etc. Type the following command

# yum --enablerepo=remi install php-gd php-mysql php-mbstring php-xml php-mcrypt

To start PHP-FPM for the first time, type the following command

# /etc/init.d/php-fpm restart

Sample output

Starting php-fpm:                                          [ OK ]

Configure PHP-FPM and Nginx working together

The configuration file for Nginx is located at /etc/nginx/nginx.conf. To edit nginx.conf type the following command

# vi /etc/nginx/nginx.conf

Uncomment and edit as follows

        ...
	location / {
            root   /usr/share/nginx/html;
            index  index.html index.htm index.php;
        }
        ...
	location ~ \.php$ {
            root           html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
            include        fastcgi_params;
        }
        ...

Restart Nginx to reload new configuration, enter

# /etc/init.d/nginx reload

Now create the following PHP file in the document root

# vi /usr/share/nginx/html/info.php

Append content as follows:

<?php
phpinfo();
?>

Access it http://YOUR-SERVER-IP

Nginx Virtual Hosting Configuration

Your sample setup
IP: 192.168.1.113
Domain: domain.local
Hosted at: /home/www/domain.local

Type the following command to create user called www

# useradd www

Create necessary directories

# mkdir -p /home/www/domain.local/public_html
# mkdir -p /home/www/domain.local/log
# chown -R www.www /home/www/
# chmod 755 /home/www/

Creating virtual host config file

# cd /etc/nginx/conf.d/
# cp virtual.conf www.conf

Open www.conf, enter

# vi /etc/nginx/conf.d/www.conf

Append configuration as follows:

server {
        server_name  domain.local;
        root /home/www/domain.local/public_html;
        access_log /home/www/domain.local/log/domain.local-access.log;
        error_log /home/www/domain.local/log/domain.local-error.log;

        location / {
                index  index.html index.htm index.php;
        }
        location ~ \.php$ {
                include /etc/nginx/fastcgi_params;
                fastcgi_pass  127.0.0.1:9000;
                fastcgi_index index.php;
                fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        }
}

You can also check the current status as well as the configuration syntax:

# /etc/init.d/nginx configtest

Sample outputs

the configuration file /etc/nginx/nginx.conf syntax is ok
configuration file /etc/nginx/nginx.conf test is successful

Now edit /etc/php-fpm.d/www.conf to change the users who own the php-fpm processes to www, enter

# vi /etc/php-fpm.d/www.conf

Find “group of processes” and edit as follows:

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
; RPM: apache Choosed to be able to access some dir as httpd
user = www
; RPM: Keep a group allowed to write in log dir.
group = www

Finally restart nginx

# /etc/init.d/nginx restart
# /etc/init.d/php-fpm restart

The post How To Install Nginx And PHP-FPM On CentOS 6 Via Yum appeared first on lifeLinux: Linux Tips, Hacks, Tutorials, Ebooks.

In this article, I’ll go over the steps of how to install Nginx and PHP (PHP-FPM) working together on CentOS 6. To start I used clean version of CentOS 6.

The first step is update CentOS to latest version, type the following command

# yum update -y

Install some packages need for the following steps

# yum install gcc.x86_64 gcc-c++.x86_64 make.x86_64 wget.x86_64

Install Nginx

Download latest version of Nginx at http://nginx.org/

# wget http://nginx.org/download/nginx-1.0.5.tar.gz

Extract nginx-1.0.5.tar.gz package

# tar zxvf nginx-1.0.5.tar.gz
# cd nginx-1.0.5

To build nginx, type the following command

# ./configure --prefix=/webserver/nginx --without-mail_pop3_module --without-mail_imap_module  --without-mail_smtp_module --with-http_ssl_module  --with-http_stub_status_module  --with-http_gzip_static_module
# make
# make install

You may get some errors like the following

./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using --with-pcre= option.

To fix it, enter

# yum install pcre-devel.x86_64

/configure: error: SSL modules require the OpenSSL library.
You can either do not enable the modules, or install the OpenSSL library
into the system, or build the OpenSSL library statically from the source
with nginx by using --with-openssl= option.

To fix it, enter

# yum install openssl.x86_64 openssl-devel.x86_64

When build process completed successfully, it’ll display as follows

  Configuration summary
  + using system PCRE library
  + using system OpenSSL library
  + md5: using OpenSSL library
  + sha1: using OpenSSL library
  + using system zlib library

  nginx path prefix: "/webserver/nginx"
  nginx binary file: "/webserver/nginx/sbin/nginx"
  nginx configuration prefix: "/webserver/nginx/conf"
  nginx configuration file: "/webserver/nginx/conf/nginx.conf"
  nginx pid file: "/webserver/nginx/logs/nginx.pid"
  nginx error log file: "/webserver/nginx/logs/error.log"
  nginx http access log file: "/webserver/nginx/logs/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"

If you want to run Nginx by default when the system boots, create file called nginx in /etc/init.d/ with following content

#!/bin/sh
#
# nginx – this script starts and stops the nginx daemon
#
# chkconfig: - 85 15
# description: Nginx is an HTTP(S) server, HTTP(S) reverse \
# proxy and IMAP/POP3 proxy server
# processname: nginx
# config: /opt/nginx/conf/nginx.conf
# pidfile: /opt/nginx/logs/nginx.pid

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

# Check that networking is up.
[ "$NETWORKING" = "no" ] && exit 0

nginx="/webserver/nginx/sbin/nginx"
prog=$(basename $nginx)

NGINX_CONF_FILE="/webserver/nginx/conf/nginx.conf"

lockfile=/var/lock/subsys/nginx

start() {
	[ -x $nginx ] || exit 5
	[ -f $NGINX_CONF_FILE ] || exit 6
	echo -n $"Starting $prog: "
	daemon $nginx -c $NGINX_CONF_FILE
	retval=$?
	echo
	[ $retval -eq 0 ] && touch $lockfile
	return $retval
}

stop() {
	echo -n $"Stopping $prog: "
	killproc $prog -QUIT
	retval=$?
	echo
	[ $retval -eq 0 ] && rm -f $lockfile
	return $retval
}

restart() {
	configtest || return $?
	stop
	start
}

reload() {
	configtest || return $?
	echo -n $”Reloading $prog: ”
	killproc $nginx -HUP
	RETVAL=$?
	echo
}

force_reload() {
	restart
}

configtest() {
	$nginx -t -c $NGINX_CONF_FILE
}

rh_status() {
	status $prog
}

rh_status_q() {
	rh_status >/dev/null 2>&1
}

case "$1" in
	start)
		rh_status_q && exit 0
		$1
	;;
	stop)
		rh_status_q || exit 0
		$1
	;;
	restart|configtest)
		$1
	;;
	reload)
		rh_status_q || exit 7
		$1
	;;
	force-reload)
		force_reload
	;;
	status)
		rh_status
	;;
	condrestart|try-restart)
		rh_status_q || exit 0
	;;
	*)
		echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
		exit 2
esac

Chmod nginx with executed permission, enter

# chmod +x /etc/init.d/nginx

To start Nginx for the first time, type the following command

# /etc/init.d/nginx start

Install PHP (PHP-FPM)

Download latest version of PHP at http://download.php.net

# wget http://www.php.net/get/php-5.3.8.tar.gz/from/ca.php.net/mirror

To Extract its, enter

# tar zxvf php-5.3.8.tar.gz
# cd php-5.3.8

To build PHP, I’ll create bash file called build.sh with following content

#!/bin/sh
"./configure" \
"--prefix=/webserver/php" \
"--enable-fpm" \
"--with-libdir=lib64" \
"--with-bz2" \
"--with-config-file-path=/webserver/php/etc" \
"--with-config-file-scan-dir=/webserver/php/etc/php.d" \
"--with-curl=/usr/local/lib" \
"--with-gd" \
"--with-gettext" \
"--with-jpeg-dir=/usr/local/lib" \
"--with-freetype-dir=/usr/local/lib" \
"--with-kerberos" \
"--with-mcrypt" \
"--with-mhash" \
"--with-mysql" \
"--with-mysqli" \
"--with-pcre-regex=/usr" \
"--with-pdo-mysql=shared" \
"--with-pdo-sqlite=shared" \
"--with-pear=/usr/local/lib/php" \
"--with-png-dir=/usr/local/lib" \
"--with-pspell" \
"--with-sqlite=shared" \
"--with-tidy" \
"--with-xmlrpc" \
"--with-xsl" \
"--with-zlib" \
"--with-zlib-dir=/usr/local/lib" \
"--with-openssl" \
"--with-iconv" \
"--enable-bcmath" \
"--enable-calendar" \
"--enable-exif" \
"--enable-ftp" \
"--enable-gd-native-ttf" \
"--enable-libxml" \
"--enable-magic-quotes" \
"--enable-soap" \
"--enable-sockets" \
"--enable-mbstring" \
"--enable-zip" \
"--enable-wddx"

Type the following command to install PHP

# sh build.sh
# make
# make install

If you have problems building PHP then read the article.
Next step, copy php.ini to /webserver/php/etc/, enter

# cp php.ini-production /webserver/php/etc/php.ini

Rename php-fpm.conf, enter

# cd /webserver/php/etc
# cp php-fpm.conf.default php-fpm.conf

Edit php-fpm.conf with following content

[global]
pid = run/php-fpm.pid
error_log = log/php-fpm.log
[www]
listen = 127.0.0.1:9000
listen.allowed_clients = 127.0.0.1
user = nobody
group = nobody
pm = dynamic
pm.max_children = 50
pm.start_servers = 20
pm.min_spare_servers = 5
pm.max_spare_servers = 35
pm.max_requests = 500

If you want to run PHP-FPM by default when the system boots, create file called php-fpm in /etc/init.d/ with following content

#! /bin/sh

### BEGIN INIT INFO
# Provides:          php-fpm
# Required-Start:    $all
# Required-Stop:     $all
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php-fpm
# Description:       starts the PHP FastCGI Process Manager daemon
### END INIT INFO

php_fpm_BIN=/webserver/php/sbin/php-fpm
php_fpm_CONF=/webserver/php/etc/php-fpm.conf
php_fpm_PID=/webserver/php/var/run/php-fpm.pid

php_opts="--fpm-config $php_fpm_CONF"

wait_for_pid () {
	try=0

	while test $try -lt 35 ; do

		case "$1" in
			'created')
			if [ -f "$2" ] ; then
				try=''
				break
			fi
			;;

			'removed')
			if [ ! -f "$2" ] ; then
				try=''
				break
			fi
			;;
		esac

		echo -n .
		try=`expr $try + 1`
		sleep 1

	done

}

case "$1" in
	start)
		echo -n "Starting php-fpm "

		$php_fpm_BIN $php_opts

		if [ "$?" != 0 ] ; then
			echo " failed"
			exit 1
		fi

		wait_for_pid created $php_fpm_PID

		if [ -n "$try" ] ; then
			echo " failed"
			exit 1
		else
			echo " done"
		fi
	;;

	stop)
		echo -n "Gracefully shutting down php-fpm "

		if [ ! -r $php_fpm_PID ] ; then
			echo "warning, no pid file found - php-fpm is not running ?"
			exit 1
		fi

		kill -QUIT `cat $php_fpm_PID`

		wait_for_pid removed $php_fpm_PID

		if [ -n "$try" ] ; then
			echo " failed. Use force-exit"
			exit 1
		else
			echo " done"
		fi
	;;

	force-quit)
		echo -n "Terminating php-fpm "

		if [ ! -r $php_fpm_PID ] ; then
			echo "warning, no pid file found - php-fpm is not running ?"
			exit 1
		fi

		kill -TERM `cat $php_fpm_PID`

		wait_for_pid removed $php_fpm_PID

		if [ -n "$try" ] ; then
			echo " failed"
			exit 1
		else
			echo " done"
		fi
	;;

	restart)
		$0 stop
		$0 start
	;;

	reload)

		echo -n "Reload service php-fpm "

		if [ ! -r $php_fpm_PID ] ; then
			echo "warning, no pid file found - php-fpm is not running ?"
			exit 1
		fi

		kill -USR2 `cat $php_fpm_PID`

		echo " done"
	;;

	*)
		echo "Usage: $0 {start|stop|force-quit|restart|reload}"
		exit 1
	;;

esac

Chmod php-fpm with executed permission, enter

# chmod +x /etc/init.d/php-fpm

To start PHP-FPM for the first time, type the following command

# /etc/init.d/php-fpm start

Configure PHP-FPM and Nginx working together

The configuration file for Nginx is located at /webserver/nginx/conf/nginx.conf. To edit nginx.conf type the following command

# vi /webserver/nginx/conf/nginx.conf

Uncomment the following lines

        location ~ \.php$ {
            root           html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME $document_root$fastcgi_script_name;
            include        fastcgi_params;
        }

Type the following command to restart Nginx

# /etc/init.d/nginx restart

The post How To Install Nginx And PHP (PHP-FPM) On CentOS 6 appeared first on lifeLinux: Linux Tips, Hacks, Tutorials, Ebooks.